Installation requirements of electromagnetic flowmeter

When we use electromagnetic flowmeters daily, we may often overlook some of its installation requirements. In fact, it is very important to understand the requirements in this regard. Only by correctly understanding the installation requirements of the electromagnetic flowmeter can we make good use of it during use. Today, the editor has sorted out some points that need to be paid attention to in the installation of electromagnetic flowmeters. When installing the electromagnetic flowmeter, what are the regulations that we need to comply with?

First of all, equipotential connection should be made between the casing of the flowmeter, the measured fluid and the pipe connection flange, and it should also be grounded. When installing on a vertical official road, the flow direction of the measured fluid should be from bottom to top. When installing on a horizontal pipeline, the two measured electrodes are not allowed to be directly above and directly below the pipeline. Location. The smallest straight pipe section of the fluid meter requires 5DN upstream and 2DN downstream (DN is the passage of the pipeline). When we install it, we must ensure that there is enough space between the bolts, nuts and the pipeline flange, so that it is easy to install and unload. For the measurement of some heavily polluted fluids, the electromagnetic flowmeter should be installed on the bypass. Avoid installation in places with strong electromagnetic fields. The measuring tube of the electromagnetic flowmeter must be full. And also to ensure that the positive and negative direction or arrow direction of the flowmeter is consistent with the flow direction of the medium.

Well, the above is what we should pay attention to in the installation of electromagnetic flowmeters. I hope everyone can keep in mind that it will bring convenience to everyone when using electromagnetic flowmeters. I also hope that it can bring you an effective role when installing the electromagnetic flowmeter.